Thumbs up for Streamline Autosport (CSL replica boot lid)

Discussion in 'Dealers, garages, specialists, companies and other sellers and retailers' started by TheBiker, May 24, 2018.

  1. 24 May 2018 at 6:30 PM #1
    TheBiker

    TheBiker On the path

    Joined:
    Sep 20, 2016
    Messages:
    141
    Likes Received:
    0
    Trophy Points:
    16
    Your Motor:
    M3, 320D, RS Clio, 748SP, GSXR K6, RS250
    Just wanted to say a big thanks to Streamline autosport for the replica CSL boot lid, was originally going to go down the genuine route but once I factored in paint cost I ended up purchasing it supplied & painted from the guys and this actually comes in a fair bit lighter than the stock unit so much so I only needed to run one boot strut!

    Thanks again guys!

    [​IMG][/url]IMG_1713 by James Stone, on Flickr[/IMG]

    [​IMG][/url]IMG_1712 by James Stone, on Flickr[/IMG]
     
  2. 24 May 2018 at 8:31 PM #2
    ksa74f

    ksa74f Achieved official socks

    Joined:
    Dec 11, 2011
    Messages:
    3,717
    Likes Received:
    0
    Trophy Points:
    36
    Your Motor:
    2006 M3
    Colour Combo:
    Carbon black / Black
    You must be one of the lucky ones , Streamline are taking a beating on the yank forums.
     
  3. 24 May 2018 at 8:59 PM #3
    Topazman

    Topazman A mere Chipper

    Joined:
    May 12, 2009
    Messages:
    36
    Likes Received:
    0
    Trophy Points:
    0
    Your Motor:
    2004 BMW M3
    Think the Yanks can't fit them properly etc as I have only seen one person giving out about fitment but the oe boot lid takes a bit of fiddling etc to get right also
     
  4. 24 May 2018 at 9:38 PM #4
    TheBiker

    TheBiker On the path

    Joined:
    Sep 20, 2016
    Messages:
    141
    Likes Received:
    0
    Trophy Points:
    16
    Your Motor:
    M3, 320D, RS Clio, 748SP, GSXR K6, RS250

    I had heard of this before I bought it, it did take around an hour of tweaking to get it right and I'm not a body shop trained person so I imagine some one who knew what they were doing could have it done in a fraction of the time, I needed to make a small adjustment to the lock mounting with the dremmel but for the cost including the paint I'm very pleased with it :D

    Even the original CSL lid is not a straight bolt on, the main sway for me was the colour match without even blending, looks as good as the original paint


    [​IMG][/url]41.4 by James Stone, on Flickr[/IMG]
     
  5. 30 Jun 2018 at 7:27 PM #5
    Alex E46

    Alex E46 A mere Chipper

    Joined:
    Nov 27, 2017
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    1
    Your Motor:
    2004 M3
    Colour Combo:
    Titan Silver/Black
    How much was the boot all in? Ifvyou dont mind me asking. Ive had my eye on these for a while
     
  6. 1 Jul 2018 at 11:13 AM #6
    TheBiker

    TheBiker On the path

    Joined:
    Sep 20, 2016
    Messages:
    141
    Likes Received:
    0
    Trophy Points:
    16
    Your Motor:
    M3, 320D, RS Clio, 748SP, GSXR K6, RS250
    It was just under £500.00 all in supplied, painted & posted but there prices have increased from what I've seen as they have now revised the mould for an even better fit, more than happy with mine though :D
     
  7. 3 Jul 2018 at 4:06 PM #7
    Alex E46

    Alex E46 A mere Chipper

    Joined:
    Nov 27, 2017
    Messages:
    14
    Likes Received:
    0
    Trophy Points:
    1
    Your Motor:
    2004 M3
    Colour Combo:
    Titan Silver/Black
    Awesome, thanks. I have sent them an email :thumbsup:
     

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice