Discussion in 'CA Technologies International Ltd' started by David @ CA, Oct 16, 2015.
PM you David
Pm you again
Just ordered some!
Hi guys what is the price of the 90mm kit delivered? It's coming out at about £72 on your site.
You can also choose to have silver-zinc nuts instead of black-zinc ones?
hi thanks for the enquiry
the stud kit is £58.00 inc vat
delivery £14.00 inc vat
yes we can get silver/zinc nuts but do not stock them, they are a shade dearer another £3.00 per set. to get them especially for you there would be a delivery charge of £10.00 (our cost), we have just received an order, so probably be another 3-4 weeks for the next order/delivery of stud kits.
I have 1 set of 90mm (black nuts) in at the moment.
Got studs fitted now thanks to the guys at CA - thanks! Really good customer service as I had to swap stud sizes.
Personally I would recommend 82mm studs if you fit 12mm or 15mm spacers, and 90mm studs if you fit 20mm or 25mm spacers, based on the thread length and the size of the nut (I like to get full engagement).
Here's a quick rundown of the bullet-nose stud sizes and which spacers I would personally use as a limit:
- 68mm: 3mm
- 75mm: 10mm
- 82mm: 17mm
- 90mm: 25mm
I have a 10mm spacer at the front and no spacer on the rear. Which size studs should i be getting and do you have them in stock?
See above - 75mm minimum for a 10mm spacer.
yes agreed, 75mm stud kit ;-)
we have One kit left in stock should you need, £58.00 + delivery £12 inc vat
all the best
ordered through the site
just saw that coming in, thank you sop much !
should leave today arrive to you tomorrow
we do also have lockers in stock, and black extended length nuts, should you require at any time
all the best
i have now emailed you UPS Tracking for the stud kit, thank you again for the order ;-)
received - thank you for very quick service
you are very welcome ;-)
When would you get more stock of the 75mm's David? I've got a feeling I'll need a split set of 75mm for the front (10mm spacer) and 68 for the back (no spacer) - would this be feasible? I would run 75 all round but not sure my centre caps would fit with the longer stud on the back (BBS RS2)
the 75mm studs dues in this week, but we no longer supply the 68 mm so sorry ;(
Cool - worst case I could run the 75mms up front and OEM bolts on the rear, do you offer pairs? I'd quite like to avoid ordering 20 if I only need 10 off.
hi ..i think that would be a first lol ...but yes no problem to supply you stud kit for one axle only ;-) £44.00 delivered
Yeah and you can always pickup a 68mm stud kit for the rear separately if you still want it https://www.ebay.co.uk/itm/5x-M12x1...470492?hash=item1c625ee51c:g:5qIAAOSwZQxW2aMw