Discount For Forum members For Rogue Rear Shock Mounts

Discussion in 'CA Technologies International Ltd' started by PDM, Jul 28, 2009.

  1. 28 Jul 2009 at 11:50 AM #1
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
    Say goodbye to rear end clunks! With the introduction of the Rogue Engineering Rear Shock Mounts, you have a high quality, rebuildable, easily serviceable rear shock mount.

    Fits the following vehicles: ALL E30 inc M models / E36 inc M models / E46 inc M models / Z3 inc M models.

    Rogue Engineering Rear Shock Mount Set includes:

    Two (2) Rogue Engineering 6061-T6 CNC, Anodized Rear Shock Mounts.
    Four (4) Shore A 65 Bushings (2 required per mount).
    Two (2) 303 Stainless Steel Bushing Spacers (to be used with standard 10mm rear shocks).
    Four (4) 303 Stainless Steel Washers (2 required per mount).
    Four (4) Yellow Zinc plated serrated lock nuts.
    Two (2) Shock Tower Reinforcement Assemblies (with 10.9 hardware welded).
    Two (2) factory gaskets (#3352 1128 734).

    Problems with Factory Mounts
    The factory BMW rear shock mounts are generally a little soft, to provide the most possible acoustically dampening in the vehicle. However, design precludes them from being stout enough to withstand the rigours of aftermarket suspension, or even badly damaged roads. A decent sized pothole can send a perfectly good factory rear shock mount to pop out, making it entirely useless necessitating replacement. Upgrading to E46 M3 rear mounts (a popular alternative) is not a guarantee that it doesn't happen again and again.

    Rogue Engineering Rear Shock Mount Features
    By producing a rear shock machined from 6061-T6 aluminum, we are able attain a more stable, and stiffer platform which to mount the top of the rear shock. However, rather than use race-only spherical bearings or even overly stiff urethane bushings, we specify Shore A 65 hardness rubber bushings (approximately 30% stiffer than the factory bushings) to allow for some level of street comfort. The orientation of the bushings makes it impossible for the bushings to "pop out" in the manner which the factory mounts fail. If required, the bushings are also replaceable, when the time comes to rebuild them.

    Another feature is the reinforcement assembly which secures the rear shock mount to the vehicle. By reinforcing the top of the shock tower in the vehicle, it protect against the rear shock from ripping out the sheet metal. The reinforcement has its hardware welded to it, allowing for the rear shock mount to become a bottom-mount design. This means that if the rear shocks need to be removed, it only requires removing the two nuts and the single bolt at the bottom of the shock. No need to completely disassemble the trunk area to gain access. If being used with a rear strut tower brace, the reinforcement assembly may be mounted from the bottom, so that the rear shock mount can be secured in the traditional manner.

    Retail price £ 94.45 + postage

    Again we will offer established forum members with over 100 posts a 10% discount off these Rogue rsms.

    cheers Phil
     
  2. 28 Jul 2009 at 12:00 PM #2
    EAndy

    EAndy Achieved official socks

    Joined:
    Jan 2, 2009
    Messages:
    3,504
    Likes Received:
    43
    Trophy Points:
    48
    Location:
    UK
    Your Motor:
    Magical Unicorn
    Got a set of these going on, on Friday :) cheers CA!
     
  3. 22 Apr 2010 at 8:51 PM #3
    BRUNBERG

    BRUNBERG Achieved official socks

    Joined:
    Jul 1, 2009
    Messages:
    13,904
    Likes Received:
    66
    Trophy Points:
    48
    Location:
    Purley, Surrey
    Your Motor:
    F82 M4
    Colour Combo:
    Mineral White/Black
    Guys ive got these fitted as supplied by CA, great mod, do it
     
  4. 22 Oct 2010 at 1:09 PM #4
    MoOriginal

    MoOriginal Achieved official socks

    Joined:
    Dec 30, 2009
    Messages:
    3,461
    Likes Received:
    2
    Trophy Points:
    0
    Location:
    Home - Wembley\ Work - Norfolk
    Your Motor:
    M5 V10 Black
    Colour Combo:
    Starlight Black / Black
    Do i need it still after coils ?
     
  5. 22 Oct 2010 at 4:09 PM #5
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
    yes you do Mo :)
     
  6. 22 Oct 2010 at 4:20 PM #6
    Sinth

    Sinth Banned

    Joined:
    Aug 27, 2009
    Messages:
    6,010
    Likes Received:
    45
    Trophy Points:
    0
    Your Motor:
    BMW M3 SMG Coupe
    Colour Combo:
    Pink
    very interested Phil, are these easy to fit??? Got HSD coilovers so was wondering if its necessary
     
  7. 22 Oct 2010 at 4:25 PM #7
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
    if i recall correctly the HSD 's already come with their own rear top mounts ?
    If so the Rogue items would still be an improvement, but not essential

    thanks
     
  8. 22 Oct 2010 at 4:33 PM #8
    MoOriginal

    MoOriginal Achieved official socks

    Joined:
    Dec 30, 2009
    Messages:
    3,461
    Likes Received:
    2
    Trophy Points:
    0
    Location:
    Home - Wembley\ Work - Norfolk
    Your Motor:
    M5 V10 Black
    Colour Combo:
    Starlight Black / Black
    ah same question then phil
    I have D2's do I need them ?
     
  9. 22 Oct 2010 at 5:24 PM #9
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
    unfortunately I do not know if teh d2 s come with their own rear top mounts ??
     
  10. 22 Oct 2010 at 6:13 PM #10
    BRUNBERG

    BRUNBERG Achieved official socks

    Joined:
    Jul 1, 2009
    Messages:
    13,904
    Likes Received:
    66
    Trophy Points:
    48
    Location:
    Purley, Surrey
    Your Motor:
    F82 M4
    Colour Combo:
    Mineral White/Black
    Rogue top mounts work very well with D2's
     
  11. 3 Nov 2010 at 7:51 PM #11
    jonday1981

    jonday1981 Wearing official underwear

    Joined:
    Aug 7, 2010
    Messages:
    236
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Kent
    Your Motor:
    2005 Dodge Ram SRT10
    Colour Combo:
    Black with Black Leather
    What about these with KW Clubsport Coilovers ?
     
  12. 6 Nov 2010 at 11:43 PM #12
    jonday1981

    jonday1981 Wearing official underwear

    Joined:
    Aug 7, 2010
    Messages:
    236
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Kent
    Your Motor:
    2005 Dodge Ram SRT10
    Colour Combo:
    Black with Black Leather
    Do i still need these with KW Clubsport coilovers chaps ?

    cheers

    Jon
     
  13. 7 Nov 2010 at 3:36 PM #13
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
    They would be an advantage to you if you do fit them with the Kw's :)
     
  14. 25 Jan 2011 at 2:28 AM #14
    Redman

    Redman Achieved official socks

    Joined:
    Jan 17, 2011
    Messages:
    7,407
    Likes Received:
    10
    Trophy Points:
    38
    Location:
    NW London
    Your Motor:
    65 4 series GC F36 Msport Estoril Blue/Oaster Interior
    Hi mr CA id like a set as I'm lowering the car on eibachs, hopefully they will work well with my new springs? How do you take payment and do you have any in stock?

    Thanks
     
  15. 25 Jan 2011 at 1:32 PM #15
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
    Hi Sir,

    Add your name to the broup buy in our section adn then you will get them slightly cheaper.

    We have none in stock at the moment but they are due in in the next day or so

    cheers Phil
     
  16. 25 Jan 2011 at 1:52 PM #16
    Redman

    Redman Achieved official socks

    Joined:
    Jan 17, 2011
    Messages:
    7,407
    Likes Received:
    10
    Trophy Points:
    38
    Location:
    NW London
    Your Motor:
    65 4 series GC F36 Msport Estoril Blue/Oaster Interior
    I can't see where to add my name can do this for me. Thanks I'll make payment when ready.
     
  17. 25 Jan 2011 at 2:40 PM #17
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
  18. 23 Dec 2011 at 8:06 PM #18
    Edinnit

    Edinnit On the path

    Joined:
    Dec 12, 2011
    Messages:
    123
    Likes Received:
    0
    Trophy Points:
    0
    Your Motor:
    E46 M3
    Is there any pictures of this kit?
     
  19. 24 Dec 2011 at 2:35 PM #19
    PDM

    PDM Sponsor

    Joined:
    Jun 4, 2009
    Messages:
    1,969
    Likes Received:
    18
    Trophy Points:
    38
    Location:
    Hampshire
    Your Motor:
    Baby Wagon
  20. 10 May 2012 at 12:06 AM #20
    Nomad

    Nomad A mere Chipper

    Joined:
    Sep 28, 2009
    Messages:
    29
    Likes Received:
    0
    Trophy Points:
    0
    Your Motor:
    Z3M

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice