Adam's New Rinse + Coat

Discussion in 'Prestige Car Care Shop' started by LoadedM3, Nov 10, 2020.

  1. 10 Nov 2020 at 9:23 PM #1
    LoadedM3

    LoadedM3 Sponsor

    Joined:
    Dec 11, 2010
    Messages:
    8,428
    Likes Received:
    91
    Trophy Points:
    48
    Location:
    North west
    What're you driving?:
    2002 M3 VERT
    Colour Combo:
    brillaint white ;-)
    Adam's New Rinse + Coat

    [​IMG]



    Rinse + Coat 12oz

    Adam’s Rinse + Coat is an instant, hydrophobic sealant that can be applied with a simple mist and rinse style of application to boost hydrophobicity of your current protection or to generate new protection stand alone. Adam’s Rinse + Coat produces a dazzling amount of gloss and is surprisingly durable and chemically resistant for its ridiculously easy nature of application. One quick application can last as long as 90 days!

    • Ready to Use Formula – No Dilution Necessary
    • Effortless Spray On/Rinse Off Application
    • Provides Added Hydrophobicity, Slickness and Gloss
    • Suitable for All Surfaces Including Glass and Plastics
    • Hybridized Polymer Formulation Seals Paint for up to 90 Days!

    Available - https://www.prestigecarcareshop.com/collections/new-stock-not-live/products/rinse-coat

    Adam’s Rinse + Coat is most at home for our customers who like to visit self-serve car washes and need some instant gratification when in a hurry. After completing a wash, simply mist the Adam’s Rinse + Coat over several panels and quickly rinse off the excess product to generate a highly hydrophobic coating. Reapply as frequently as desired and enjoy the self-cleaning properties of this effortless to use detailer without the need for touching and potentially scratching your paint.


    Instructions:

    Wash vehicle and rinse thoroughly.
    On a still wet vehicle, evenly spray several mists of the sealant per car panel. Typically this is about 4-6 sprays in a given 4 ft2
    Immediately rinse with plenty of clean, ideally pressurized, water. You will see a white foam produced. Ensure that all areas are thoroughly cleaned until there is no more foam production.
    Dry the vehicle using any of our premium microfiber drying towels while ensuring any leftover remnants of the sealant are captured and leveled.

    Common Sense Warning:

    Adam’s Rinse + Coat is a sprayable sealant and its touchless nature requires the surface to be clean and clear of debris and contaminants prior to application in order to properly bond to the paint. Application of Adam’s Rinse + Coat to a dirty vehicle will result in an ineffective performance. Additionally, do not apply on a hot surface. Do not allow the product to completely dry and always give special attention to the seams of the vehicle when rinsing off the excess product.
     

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice