Detailed NCS Expert "How To" Guide

[Razza77]

First we will need to set up a coding profile within NCS expert.

1) Open NCS Expert.

2) Open up the 'Expertmode' profile.

3) Save as a new profile (give it a name, like the godfather or something powerful sounding).

4) Load the 'godfather' profile.

5) Edit it (file --> edit. Password is repxet).

6) Make sure under button 'Individualisierung' all options are crossed.

7) Make sure under button 'FSW/PSW', that 'from CVT' is chosen, and that the bottom two boxes are crossed.

8) Finally, press 'consistence check' and check it works.

9) Then press okay

You should now have a coding profile!

You read using the 'Expertmode' profile, and code using the 'Godfather' profile. (Ignore the other profile)

Once NCS is open Choose File from the top menu

Select Load Profile

Choose Expertmode profile.

Then Press F1 or choose VIN/ZCS/FA



Now press F3 or choose ZCS/FA f. Ecu




Select the model car E46


Chose the Module in which to read the ZCS/FA, In this case we select the top one. If that one doesn’t work for you, choose the next one below, etc until you find one that works. Bear in mind that the bottom two will not let you read all options. If you find that you cannot read the top one, then you may have a key programming issue (i.e. previous owner losing a key, and BMW not programming the new one properly), or that your car has had an ECU changed that doesn’t match the car’s VIN.

Upon seeing the below screen with the FG and FA Values displayed simply hit F6 or Back.




Click Process ECU




You will now get a list of installed modules that were identified when communication with the chosen "main" module as before.





Select the Module/ECU you would like to work with, In this case the GM5






Now you can choose READ ECU to perform a read out of the module.




You will get a NETTODAT.TRC file popup simply close it.



Navigate to the Work folder which resides in your NCSEXPER directory. You will locate a file FSW_PSW.TRC

This file was created when READ ECU was performed and contains the coding values for that module.

Remember this file is overwritten each time a read out of a module is performed. It would be advised to make a back up of this file in the event you need to restore coding settings. (Just right click and copy and paste the whole file on your desktop or somewhere you can remember in case there is any mistake, if you have this copy of original you can fix.)

NOTE:!!! AT THIS POINT, you have not done any programming, you have simply read the module. You should make a copy as above, but at this point you can exit NCS & disconnect from your car.... and take your time to read this copy of the trc file, and decide what you want to change... and come back to it later. When you go to the next steps, this tells you how to actually change things in your car. If you make some mistake, use your original as the .man file to change them back...

THE NEXT STEPS ARE FOR ACTUALLY CODING TO THE CAR:

Once you have made a backup, Right click and rename the file to FSW_PSW.MAN

*Once you have a .man file and are ready to code your changes to the car, you can do this step, or if you prefer, DELETE the .man file in work folder, and start over again from top.. Just make sure there is only one .man folder in work and that this includes the coding you want to change in the car.

Yes to make the change.





Now right click and choose Open With...





Select Notepad and tick always use the selected program to open this kind of file. Then Press OK.




Now we can make changes to the coding file.





Please see below list of some of the most popular available options that can be changed and their respective modules:-

Module Names

ABG - Airbag Module
AEWS - Immobilizer
AKMB - Instrument Cluster
ALSZ - Light Switch Center
BTM - Passenger mirror Module
CVM - Vert Module - don't touch this, apparently it's sensitive
DSC - DSC
FTM - Driver rearview mirror module
GM5 - ZKE - Central Body Electronics
GT - Navigation
IHK - AC
LWS - Light Switch
RAD - Radio
RLS - Rain Sensor
SM - Seat Memory
UEB - Rollover Sensor

GM5:

QUIT_AKUST_ENTSCH : alarm beep on unlock (two beeps)
QUIT_AKUST_SCHAERF : alarm beep on lock (one beep)
QUIT_OPT_ENTSCH : optical Acknowledge remote un-locking (two flashes)
QUIT_OPT_SCHAERF : optical Acknowledge remote locking (one flash)

ALARM_OPT_ABBLENDLICHT : alarm flashes low beam when tripped
ALARM_OPT_WARNBLINKER : " " emergency flashers when tripped
ALARM_OPT_FERNLICHT : " " high beam when tripped

BEIKLAPPEN_B_KOMFORTSCHL : press the unlock button twice, and the drivers window will open

FH_TUEREN_HINTEN_TIPP_AUF :rear window power down one touch
FH_TUEREN_HINTEN_TIPP_ZU : rear window power up one touch
FH_ZTR_SCHALTER_TIPP_AUF : window switch down one touch
FH_ZTR_SCHALTER_TIPP_ZU : " " up " "
(do these after modifying the switches)

KOMFORTOEFFNEN_FB_O_FH_HI :remote opens rear window (this has to be nicht_aktiv)
KOMFORTSCHLIE_FB_O_FH_HI : remote closes rear window (this has to be nicht_aktiv)
KOMFORTOEFFNEN_FB_O_SHD : holding open button on remote opens windows without sun roof
KOMFORTSCHLIE_FB_OHNE_SHD : holding close button on remote closes windows without sun roof
KOMFORTOEFFNUNG_FB : convertible top opens by holding the open button on remote..Or opens all windows & sun roof on non convertible
KOMFORTSCHLIESSUNG_FB : convertible top closes by holding the close button on remote..Or closes all windows &sun roof on non convertible

MAUT_N_ABBRECH_N_TUER_AUF - windows carry on opening/closing even when you open the door

VERRIEGELN_AUT_AB_X_KMH : automatic central locking after X KMH
VERRIEGELN_AUT_NACH_2_MIN : automatic central locking is re -locked after 2 MIN if you dont open a door
VERRIEGELUNGSSCHWELLE : locking Device-swells (threshold) (speed of X above)
VERRIEGELN_XKM/H_SENDER_1
VERRIEGELN_XKM/H_SENDER_2
VERRIEGELN_XKM/H_SENDER_3
VERRIEGELN_XKM/H_SENDER_4
(these all have to be aktiv for the auto central locking to work on all keys)

PANIK_MODUS - panic mode! press and hold boot button for the siren

--
CYCL_TI_BLK;1-touch on turn signal blinks. einmal-1 . zweimal-2 . dreimal-3.
One touch indicators, lane change.

BLINKIMPULS_WARNBLK to wert_04 - double impulse hazards

HHS_AUTOMATIK - enable auto rear window fogger
(I haven't found the last three in any module, but I can see it in the full read-out. So if you find it, then tell!!)

FTM/BTM:

SPIEGELABKLAPPEN_GM - folding mirrors with lock/unlock

ABKLAPPWERT_GM (in GM5) - mirror tilt value
ABKLAPPWERT - mirror tilt value

SPIEGELMEMORY - gives you the option to change the mirror tilt value whilst it's in reverse

ALSZ:

HEIMLEUCHTEN : home lights activated by flashing high beam with key off
HEIMLEUCHTEN_ABBRUCH : home light stop
HEIMLEUCHTEN_AL :home lights are low beam
HEIMLEUCHTEN_BL : " " " turn signals
HEIMLEUCHTEN_FL : " " " high beam
HEIMLEUCHTEN_FUNKSCHL :lights on on closing car with remote (only on e39 )
HEIMLEUCHTEN_KL58G : home lights are interior backlighting, cluster, ashtray etc.
HEIMLEUCHTEN_KZL : " " " license plate
HEIMLEUCHTEN_NSL : " " " rear foglight
HEIMLEUCHTEN_NSW : " " " front foglight
HEIMLEUCHTEN_RFS : " " " reverse light
HEIMLEUCHTEN_SL_H :" " " rear parking lights
HEIMLEUCHTEN_SL_V :" " " forward parking lights

FL_UND_NSW_NICHT_GLEICHZ : high beam & fog lights come on together when nicht_aktiv (I haven't got this working yet)

Xenons with high beam:
PWM_WERT2_FL_BIXENON
wert_02
to
PWM_WERT2_FL_BIXENON
wert_01
(I haven't tried this yet)


LED (ALSZ) upgrade:


KALTUEBERWACHUNG_BL_MI : " " " " brake light
WARMUEBERWACHUNG_BL_MI : " " " " brakes
FEHLER_BL_BLINKEN

(if these don't work, then retrofit with GT1 instead).


Seat:
AUT_SPIEGELVERSTELLUNG : automatic mirror adjustment linked to specific key
AUT_SITZVERSTELLUNG :choose between automatic seat adjustment [nach_fb_entriegeln] when remote signals door open or[nach_entr_u_tuer_oeffnen] when door opened

(A bit hit and miss with these)


IHK:
1. DISPLAYANZEIGE_HIGH :temp. display on ihka shows HI if aktive 32*C if not aktive
2. DISPLAYANZEIGE_LOW :temp. display on ihka shows LO if aktive 16*C if not aktive


Others:

REGENSCHLIESSEN - Rain sensor closes sunroof! (I haven't found these yet!)
REGENSCHLIESSENTILT


Car Key memory:

A heres a guide to car/key profile and button in NCS:

The typical sequence for the customization is as follows:

1. Button Select the "individualization".
-> The operating side, the potential for the individualization ZCS FSWs customizable displays the selectable PSWs. The intended state of PSWs is marked with a prefix 'S'.
2. Button Select the "READ".
-> The actual state of the customizable PSWs FSWs is determined and with a leading 'I' marked.
3. Button Select the "TAKE OVER".
-> The currently selected PSW becomes the new target value for the vehicle in the list of gänderten PSWs.

4. Button select "BROADCAST".
-> The controllers of the vehicle in which PSWs have changed are encoded. Amended by promoting PSWs the list of changed PSWs.

Anyway, back to coding. Once you’ve made the changes you want, save the file.




Choose file and click save. (common mistakes here is saving the .man folder incorrectly as a .txt file, make sure when saving you have a .man file, not .man.txt! will not work. If problem saving, choose instead "save as" and where box says file type. Choose "all files" not text.




Now click Load Profile



Choose the Godfather Profile




Now press Process ECU so we can tell NCS Expert what module we would like to code to.

Choose the Module and press ok. (Make sure this is same modules you read from!)

Press Ok.



Now we are ready to code the PSW_FSW.man to our GM5 unit. Make sure the JOBNAME is set to SG_CODIEREN.
If it is not simply click ‘job’ and choose SG_CODIEREN. Make sure you’re using the module you previously read from: in this case the GM5 (Or the unit you will be working with)

Hit Execute Job to perform coding.

Underneath GM5 a status will appear initially saying CODING ACTIV and then CODING ENDED. Depending on size of file and can be a few seconds or a few minutes... very important not to disturb car or computer here... if battery dies, coding incomplete... you will have to use your back up... not very common, but it’s always possible! Always back up original!!

Once this is completed you may power off the car wait 10 seconds and repower up to see whether your coding changes have taken.

[M3Laith]

Sweet sticky this!

[Razza77]

Please see below list of available options that can be changed and their respective modules:-

Module Names

ABG - Airbag Module
AEWS - Immobilizer
AKMB - Instrument Cluster
ALSZ - Light Switch Center
BTM - Passenger mirror Module
CVM - Vert Module - don't touch this, apparently it's sensitive
DSC - DSC
FTM - Driver rearview mirror module
GM5 - ZKE - Central Body Electronics
GT - Navigation
IHK - AC
LWS - Light Switch
RAD - Radio
RLS - Rain Sensor
SM - Seat Memory
UEB - Rollover Sensor

GM5:

QUIT_AKUST_ENTSCH : alarm beep on unlock (two beeps)
QUIT_AKUST_SCHAERF : alarm beep on lock (one beep)
QUIT_OPT_ENTSCH : optical Acknowledge remote un-locking (two flashes)
QUIT_OPT_SCHAERF : optical Acknowledge remote locking (one flash)

ALARM_OPT_ABBLENDLICHT : alarm flashes low beam when tripped
ALARM_OPT_WARNBLINKER : " " emergency flashers when tripped
ALARM_OPT_FERNLICHT : " " high beam when tripped

ALARM_AKUSTISCH :alarm sound choices (dauerton is the US tone/intervallton is the euro)
PANIK_MODUS :Panic mode
DWA_HANDSCHUHFACHKONTAKT :Alarm glove compartment switch
BEIKLAPPEN_B_KOMFORTSCHL : press the unlock button twice, and the drivers window will open

FH_TUEREN_HINTEN_TIPP_AUF :rear window power down one touch
FH_TUEREN_HINTEN_TIPP_ZU : rear window power up one touch
FH_ZTR_SCHALTER_TIPP_AUF : window switch down one touch
FH_ZTR_SCHALTER_TIPP_ZU : " " up " "
(do these after modifying the switches)

KOMFORTOEFFNEN_FB_O_FH_HI :remote opens rear window (this has to be nicht_aktiv)
KOMFORTSCHLIE_FB_O_FH_HI : remote closes rear window (this has to be nicht_aktiv)
KOMFORTOEFFNEN_FB_O_SHD : holding open button on remote opens windows without sun roof
KOMFORTSCHLIE_FB_OHNE_SHD : holding close button on remote closes windows without sun roof
KOMFORTOEFFNUNG_FB : convertible top opens by holding the open button on remote..Or opens all windows & sun roof on non convertible
KOMFORTSCHLIESSUNG_FB : convertible top closes by holding the close button on remote..Or closes all windows &sun roof on non convertible

MAUT_N_ABBRECH_N_TUER_AUF - windows carry on opening/closing even when you open the door

VERRIEGELN_AUT_AB_X_KMH : automatic central locking after X KMH
VERRIEGELN_AUT_NACH_2_MIN : automatic central locking is re -locked after 2 MIN if you dont open a door
VERRIEGELUNGSSCHWELLE : locking Device-swells (threshold) (speed of X above)
VERRIEGELN_XKM/H_SENDER_1
VERRIEGELN_XKM/H_SENDER_2
VERRIEGELN_XKM/H_SENDER_3
VERRIEGELN_XKM/H_SENDER_4
(these all have to be aktiv for the auto central locking to work on all keys)

PANIK_MODUS - panic mode! press and hold boot button for the siren

CYCL_TI_BLK;1-touch on turn signal blinks. einmal-1 . zweimal-2 . dreimal-3.
One touch indicators, lane change.

HHS_AUTOMATIK - enable auto rear window fogger
(I haven't found the last three in any module, but I can see it in the full read-out. So if you find it, then tell!!)

FTM/BTM:

SPIEGELABKLAPPEN_GM - folding mirrors with lock/unlock

ABKLAPPWERT_GM (in GM5) - mirror tilt value
ABKLAPPWERT - mirror tilt value

SPIEGELMEMORY - gives you the option to change the mirror tilt value whilst it's in reverse

ALSZ:

HEIMLEUCHTEN : home lights activated by flashing high beam with key off
HEIMLEUCHTEN_ABBRUCH : home light stop
HEIMLEUCHTEN_AL :home lights are low beam
HEIMLEUCHTEN_BL : " " " turn signals
HEIMLEUCHTEN_FL : " " " high beam
HEIMLEUCHTEN_FUNKSCHL :lights on on closing car with remote (only on e39 )
HEIMLEUCHTEN_KL58G : home lights are interior backlighting, cluster, ashtray etc.
HEIMLEUCHTEN_KZL : " " " license plate
HEIMLEUCHTEN_NSL : " " " rear foglight
HEIMLEUCHTEN_NSW : " " " front foglight
HEIMLEUCHTEN_RFS : " " " reverse light
HEIMLEUCHTEN_SL_H :" " " rear parking lights
HEIMLEUCHTEN_SL_V :" " " forward parking lights

FL_UND_NSW_NICHT_GLEICHZ : high beam & fog lights come on together when nicht_aktiv (I haven't got this working yet)

Xenons with high beam:
PWM_WERT2_FL_BIXENON
wert_02
to
PWM_WERT2_FL_BIXENON
wert_01
(I haven't tried this yet)

BLINKIMPULS_WARNBLK to wert_04 - double impulse hazards.

AKMB

Set warning tone on key in ignition.

Code: ZUENDSCHLUESSEL_WARNUNG = aktiv

Be warned, writing this code appears to reset the cluster, so you need to set time and date afterwards.

LED (ALSZ) upgrade:

KALTUEBERWACHUNG_BL_MI : " " " " brake light
WARMUEBERWACHUNG_BL_MI : " " " " brakes
FEHLER_BL_BLINKEN

(if these don't work, then retrofit with GT1 instead).

Seat:
AUT_SPIEGELVERSTELLUNG : automatic mirror adjustment linked to specific key
AUT_SITZVERSTELLUNG :choose between automatic seat adjustment [nach_fb_entriegeln] when remote signals door open or[nach_entr_u_tuer_oeffnen] when door opened

(A bit hit and miss with these)

IHK:
1. DISPLAYANZEIGE_HIGH :temp. display on ihka shows HI if aktive 32*C if not aktive
2. DISPLAYANZEIGE_LOW :temp. display on ihka shows LO if aktive 16*C if not aktive

Others:

REGENSCHLIESSEN - Rain sensor closes sunroof! (I haven't found these yet!)
REGENSCHLIESSENTILT

Car Key memory:

A heres a guide to car/key profile and button in NCS:

The typical sequence for the customization is as follows:

1. Button Select the "individualization".
-> The operating side, the potential for the individualization ZCS FSWs customizable displays the selectable PSWs. The intended state of PSWs is marked with a prefix 'S'.
2. Button Select the "READ".
-> The actual state of the customizable PSWs FSWs is determined and with a leading 'I' marked.
3. Button Select the "TAKE OVER".
-> The currently selected PSW becomes the new target value for the vehicle in the list of gänderten PSWs.
4. Button select "BROADCAST".
-> The controllers of the vehicle in which PSWs have changed are encoded. Amended by promoting PSWs the list of changed PSWs.

[Dexter]

Just what I was looking for,Thanks Razza!

[Dexter]

Hey,




'CYCL_TI_BLK;1-touch on turn signal blinks. einmal-1 . zweimal-2 . dreimal-3.
One touch indicators, lane change'

I can't seem to find this in any of my modules? I also just changed a few things so I get an audible beep when locking/unlocking but that doesn't seem to have worked?


thanks,

[Razza77]

Quote:

Originally Posted by Dexter

Hey,




'CYCL_TI_BLK;1-touch on turn signal blinks. einmal-1 . zweimal-2 . dreimal-3.
One touch indicators, lane change'

I can't seem to find this in any of my modules? I also just changed a few things so I get an audible beep when locking/unlocking but that doesn't seem to have worked?


thanks,

Its in the ALSZ main module and then the ALSZ subsequent module.

Are you using the godfather profile it sounds like you are reading the modules but not writing to them.

Raz.

[Dexter]

Hey,


how do you mean subsequent module? I used the Expert mode to find the module files,then edited them in notepad and re 'uploaded' them with the godfather profile

thanks,

[Razza77]

Quote:

Originally Posted by Dexter

Hey,


how do you mean subsequent module? I used the Expert mode to find the module files,then edited them in notepad and re 'uploaded' them with the godfather profile

thanks,

Hi,

After you select E46 it asks for you to select which module you would like to read and i think you have 4 choices AKMB, ALSZ and two others.

You then go back (F6) and then click process ECU.

It then gives you the subsequent module to read.

This list is much longer and includes the GM5 and ALSZ modules that you are looking for.

You then click read ecu and it creates the .trc folder.

Raz.

[Dexter]

Hey,

ok,well after i select e46 i select the top option as in your guide,and then GM5 etc


you think i shouldn't be selecting the top option?

[Razza77]

Quote:

Originally Posted by Dexter

Hey,

ok,well after i select e46 i select the top option as in your guide,and then GM5 etc


you think i shouldn't be selecting the top option?

Sorry just re read your earlier posts on the option you are trying to change and you are correct this option should be within the GM5 module.

I dont think it matters which of the first two you select AKMB or ALSZ but dont think either of the bottom two will read anything.

There was a post in regard to the one touch indicators and this option may not be available on all cars so this may be why you cannot find it on your car.

[Dexter]

my car is a 2004,what about if I add in the code?

i'v run the GM5 list thru a translator...still doesnt make much sense owever...



WISCHERPOTI actively ANLAUFSTROMBEGRENZ_MEMO actively SCHEIBENABSENK_WITHOUT_EKS not actively Technical
College_AFTER_DOOR_ON not actively E52_FUNKTIONEN not actively WINDOW CRANK AHEAD actively
DIFFERENCE_START_BLOCK appraise_01 Technical College_driver doors_TIPS_ON actively Technical College_passenger
door_TIP_ON actively FH_TUEREN_HINTEN_TIPP_AUF actively FH_ZTR_SCHALTER_TIPP_AUF actively
FH_ZTR_SCHALTER_TIPP_ZU not actively DISK layer time appraise_01 TIMES_DOORS/close times appraise_01
VERRIEGELN_AUT_AB_X_KM/H not actively VERRIEGELN_AUT_NACH_2_MIN not actively SOFT_ON/OFF actively
IB_A_LOCK_UNBOLTING actively IB_BEI_KL.R_AUS aktiv_mit_kl.58 SWITCHING OFF CONSUMER actively TAILGATE LOGIC
KOMFORTSCHLIE_FB closed_WITHOUT_SHD not actively ENTRANCE_2 not actively EINGANG_2_KONTAKT_GESCHL not actively
QUIT_AKUST_SHARPNESS not actively interior light_AT_REPEATEDLY_ZV actively VERZUG_PANIK_MODUS_0.2_S
appraise_01 VERRIEGELN_XKM/H_SENDER_1 not actively HKL_BARRIERS_IN_ZS not actively VERRIEGELN_XKM/H_SENDER_2
actively VERRIEGELN_XKM/H_SENDER_3 actively VERRIEGELN_XKM/H_SENDER_4 not actively WIPER_BACK_GESCHW
appraise_01 EKS_OPENLY/INTERRUPTION appraise_01 EKS_PRESSED/OPENLY appraise_01 CODIERUNG_ERFOLGT_1 encodings
resulted bolt threshold 16_km/h KOMFORTOEFFNEN_FB_O_FH_HI not actively KOMFORTOEFFNEN_FB_O_SHD not actively
IB_BARRIER_IN_MISTAKE actively WITHOUT interval business not actively interval time_GESCHWABH actively
KENNLINIENFELD2_AKTIV not actively do not block protection_ACT_XXS 16s WITH_WIPERS_service behinds not
actively WIPER_VOLLEND_KLR_OUT OF not actively SENSOR_REGEN_N_STUFE2 not actively SCRAPS_FIRST_XXS_WIPED 300ms
WITHOUT_SCRAP_IN_WIPED not actively AMOUNT after scrap cycle 3 AMOUNT_WASCHBET_TO THAT_SRA 5 WITH_SRA_A_direct
cane not actively SRA_MIT_WASCH_WISCH_SW not actively AMOUNT of syringe impulses 2 of DURATION syringe
impulses of 700ms RECESS_ZW_syringe impulses
RECESS_ZW_syringe impulses 1300ms MAUT_N_ABBRECH_N_TUER_AUF actively EKS_REVERSIERZEIT_ZUS 1000ms Technical
College_TIMEOUT 8s KISI_N_DEAKT_IM_CRASH not actively issue window TIME plus_0s EINSTIEG_FH_ZU_VER_SPERRE not
actively CENT_LOCK_MGL_VO_TUER_AUF not actively REAR WINDOW LOGIC N_VER_B_ERN_GESCHW_SCHWEL short-circuited
did not close not actively head for time_ZV_AGGREGATES plus_0s ENTR_HKL_MGL_WENN_VER not actively
ENTR_HS_MGL_WENN_VER not actively SCHLIESSYSTEM d_UNBOLTING_HKL time POLLING_TIME_L_LOCK 10ms
BETAET_DURATION_WIPPTASTE NOTENTRIEGELN_HKL actively IB_EIN_BEI_HKK/HSK not actively IB_EIN_16MIN_WENN_STANDLI
not actively IB_AUS_NACH_X_SEKUNDEN 20s IB_EIN_N_KL_58G_MAX_1MIN not actively VA1/VA2_AUS_NACH_X_MIN 16_min
VA1_SPERRE_BEI_FEHLER not actively VA2_SPERRE_BEI_FEHLER not actively VERL_ALARMZEI_WAEHR_ALARM WINDOWS not
actively OPEN not actively howl tone not actively DELAY_ENTR_TAILGATE plus_0.4s E85_FUNKTIONEN actively
E83_FUNKTIONEN not actively WITHOUT fabrication fashion not actively WITHOUT carrier fashion not actively
WITHOUT service fashion not actively WITHOUT_POWERDOWNMODE not actively BETRMODI_DEAKT_KL15_EIN not actively
THRESHOLD ABOVE appraise_01 THRESHOLDS BELOW appraise_01 VERDECK_VORNE_E85 not actively CODIERUNG_ERFOLGT_2
encoding not taken place BY MEANS OF_LIN_SWITCH not actively MEMORY_BEHIND_STORAGE appraise_01
MEMORYANFAHRGENAUIGKEIT standards MEMORY_BEHIND_CONVEYING appraise_01 ABKLAPPWERT_GM appraise_01
MEMORIES_SP_ABKLAPPEN_GM not actively DELAY_MOTOR_ZV_IT appraise_01 wiper intervals 5_sec
ENTSICHERN_center curl not actively QUIT_AKUST_SHARPNESS_LID not actively QUIT_AKUST_ENTSCH not actively
ALARM_OPT_HIGH BEAM not actively PANIC MODE not actively floodlight cleaning actively SENSOR RAIN actively
STANDRUECKSCHALTUNG not actively STROKE_DELAY_Technical College_AHEAD 500ms WITHOUT disk reduction not
actively function door lock not actively REMOTE CONTROL_1 not actively REMOTE CONTROL_2 not actively REMOTE
CONTROL_3 not actively REMOTE CONTROL_4 not actively Technical College disengage criterion Us FUNCTION
CONVERTIBLE not actively comfort opening_FB actively Technical College_LAYERING_COVERING_OEFF not actively
issue window actively WINDOW CRANK BEHIND actively EINKLEMMSCH_AHEAD actively EINKLEMMSCH_BEHIND not actively
EINKLEMMSCH_REVERSIEREN long Technical College_driver door_TIP_TO actively MAUT_NUR_BEI_KL15EIN not actively
Technical College_passenger door_TIP_TO actively FH_TUEREN_HINTEN_TIPP_ZU not actively FUNCTIONS_TOURING not
actively HECKSCHEIBE_ENTR_SENDER_1 not actively HECKSCHEIBE_ENTR_SENDER_2 not actively
HECKSCHEIBE_ENTR_SENDER_3 not actively HECKSCHEIBE_ENTR_SENDER_4 not actively REAR WINDOW_ENTRI_INTERIOR not
actively KOMFORTSCHLIE_FB_O_FH_HI actively
ENTSICHERN_center curl not actively QUIT_AKUST_SHARPNESS_LID not actively QUIT_AKUST_ENTSCH not actively
ALARM_OPT_HIGH BEAM not actively PANIC MODE not actively floodlight cleaning actively SENSOR RAIN actively
STANDRUECKSCHALTUNG not actively STROKE_DELAY_Technical College_AHEAD 500ms WITHOUT disk reduction not
actively function door lock not actively REMOTE CONTROL_1 not actively REMOTE CONTROL_2 not actively REMOTE
CONTROL_3 not actively REMOTE CONTROL_4 not actively Technical College disengage criterion Us FUNCTION
CONVERTIBLE not actively comfort opening_FB actively Technical College_LAYERING_COVERING_OEFF not actively
issue window actively WINDOW CRANK BEHIND actively EINKLEMMSCH_AHEAD actively EINKLEMMSCH_BEHIND not actively
EINKLEMMSCH_REVERSIEREN long Technical College_driver door_TIP_TO actively MAUT_NUR_BEI_KL15EIN not actively
Technical College_passenger door_TIP_TO actively FH_TUEREN_HINTEN_TIPP_ZU not actively FUNCTIONS_TOURING not
actively HECKSCHEIBE_ENTR_SENDER_1 not actively HECKSCHEIBE_ENTR_SENDER_2 not actively
HECKSCHEIBE_ENTR_SENDER_3 not actively HECKSCHEIBE_ENTR_SENDER_4 not actively REAR WINDOW_ENTRI_INTERIOR not
actively KOMFORTSCHLIE_FB_O_FH_HI actively

[Razza77]

Hi Mate,

Just had a look through my modules and i cannot find this item either so may be a mistake in the original post that i copied them codes from??

This is not an option i was looking to change so not one i had look into.

[Dexter]

strange...I wondering if actually adding the code into the module it will work?

[Razza77]

Quote:

Originally Posted by Dexter

strange...I wondering if actually adding the code into the module it will work?

Dont know the answer to that one mate never tried adding to the file myself and not really sure if you should.

Maybe someone else might know the answer to this one???

[Dexter]

just been out and tried a handful of times to write this man file to the car,everything appears to go ok,I get the 'coding and then the coding ended' message but,then upon re-reading the TRC file,the option are still set to off.

[Razza77]

Quote:

Originally Posted by Dexter

just been out and tried a handful of times to write this man file to the car,everything appears to go ok,I get the 'coding and then the coding ended' message but,then upon re-reading the TRC file,the option are still set to off.

Once the coding has finished i normally turn the ignition off and then leave it for 20 seconds and then check to see if the changes have been taken.

i take it you are doing that and no changes are there and then when reading again the changes you have made are not changed.

If the above is the case then it would appear that it is not writing to the module even though it looks to be.

I would double check the godfather profile that you set up again just to make sure that is all correct.

[fjrman]

Hi Dexter,

go here for a better translator ncsdummy.rar

it will translate as you use ncs expert


Steve

Quote:

Originally Posted by Dexter

my car is a 2004,what about if I add in the code?

i'v run the GM5 list thru a translator...still doesnt make much sense owever...



WISCHERPOTI actively ANLAUFSTROMBEGRENZ_MEMO actively SCHEIBENABSENK_WITHOUT_EKS not actively Technical
College_AFTER_DOOR_ON not actively E52_FUNKTIONEN not actively WINDOW CRANK AHEAD actively
DIFFERENCE_START_BLOCK appraise_01 Technical College_driver doors_TIPS_ON actively Technical College_passenger
door_TIP_ON actively FH_TUEREN_HINTEN_TIPP_AUF actively FH_ZTR_SCHALTER_TIPP_AUF actively
FH_ZTR_SCHALTER_TIPP_ZU not actively DISK layer time appraise_01 TIMES_DOORS/close times appraise_01
VERRIEGELN_AUT_AB_X_KM/H not actively VERRIEGELN_AUT_NACH_2_MIN not actively SOFT_ON/OFF actively
IB_A_LOCK_UNBOLTING actively IB_BEI_KL.R_AUS aktiv_mit_kl.58 SWITCHING OFF CONSUMER actively TAILGATE LOGIC
KOMFORTSCHLIE_FB closed_WITHOUT_SHD not actively ENTRANCE_2 not actively EINGANG_2_KONTAKT_GESCHL not actively
QUIT_AKUST_SHARPNESS not actively interior light_AT_REPEATEDLY_ZV actively VERZUG_PANIK_MODUS_0.2_S
appraise_01 VERRIEGELN_XKM/H_SENDER_1 not actively HKL_BARRIERS_IN_ZS not actively VERRIEGELN_XKM/H_SENDER_2
actively VERRIEGELN_XKM/H_SENDER_3 actively VERRIEGELN_XKM/H_SENDER_4 not actively WIPER_BACK_GESCHW
appraise_01 EKS_OPENLY/INTERRUPTION appraise_01 EKS_PRESSED/OPENLY appraise_01 CODIERUNG_ERFOLGT_1 encodings
resulted bolt threshold 16_km/h KOMFORTOEFFNEN_FB_O_FH_HI not actively KOMFORTOEFFNEN_FB_O_SHD not actively
IB_BARRIER_IN_MISTAKE actively WITHOUT interval business not actively interval time_GESCHWABH actively
KENNLINIENFELD2_AKTIV not actively do not block protection_ACT_XXS 16s WITH_WIPERS_service behinds not
actively WIPER_VOLLEND_KLR_OUT OF not actively SENSOR_REGEN_N_STUFE2 not actively SCRAPS_FIRST_XXS_WIPED 300ms
WITHOUT_SCRAP_IN_WIPED not actively AMOUNT after scrap cycle 3 AMOUNT_WASCHBET_TO THAT_SRA 5 WITH_SRA_A_direct
cane not actively SRA_MIT_WASCH_WISCH_SW not actively AMOUNT of syringe impulses 2 of DURATION syringe
impulses of 700ms RECESS_ZW_syringe impulses
RECESS_ZW_syringe impulses 1300ms MAUT_N_ABBRECH_N_TUER_AUF actively EKS_REVERSIERZEIT_ZUS 1000ms Technical
College_TIMEOUT 8s KISI_N_DEAKT_IM_CRASH not actively issue window TIME plus_0s EINSTIEG_FH_ZU_VER_SPERRE not
actively CENT_LOCK_MGL_VO_TUER_AUF not actively REAR WINDOW LOGIC N_VER_B_ERN_GESCHW_SCHWEL short-circuited
did not close not actively head for time_ZV_AGGREGATES plus_0s ENTR_HKL_MGL_WENN_VER not actively
ENTR_HS_MGL_WENN_VER not actively SCHLIESSYSTEM d_UNBOLTING_HKL time POLLING_TIME_L_LOCK 10ms
BETAET_DURATION_WIPPTASTE NOTENTRIEGELN_HKL actively IB_EIN_BEI_HKK/HSK not actively IB_EIN_16MIN_WENN_STANDLI
not actively IB_AUS_NACH_X_SEKUNDEN 20s IB_EIN_N_KL_58G_MAX_1MIN not actively VA1/VA2_AUS_NACH_X_MIN 16_min
VA1_SPERRE_BEI_FEHLER not actively VA2_SPERRE_BEI_FEHLER not actively VERL_ALARMZEI_WAEHR_ALARM WINDOWS not
actively OPEN not actively howl tone not actively DELAY_ENTR_TAILGATE plus_0.4s E85_FUNKTIONEN actively
E83_FUNKTIONEN not actively WITHOUT fabrication fashion not actively WITHOUT carrier fashion not actively
WITHOUT service fashion not actively WITHOUT_POWERDOWNMODE not actively BETRMODI_DEAKT_KL15_EIN not actively
THRESHOLD ABOVE appraise_01 THRESHOLDS BELOW appraise_01 VERDECK_VORNE_E85 not actively CODIERUNG_ERFOLGT_2
encoding not taken place BY MEANS OF_LIN_SWITCH not actively MEMORY_BEHIND_STORAGE appraise_01
MEMORYANFAHRGENAUIGKEIT standards MEMORY_BEHIND_CONVEYING appraise_01 ABKLAPPWERT_GM appraise_01
MEMORIES_SP_ABKLAPPEN_GM not actively DELAY_MOTOR_ZV_IT appraise_01 wiper intervals 5_sec
ENTSICHERN_center curl not actively QUIT_AKUST_SHARPNESS_LID not actively QUIT_AKUST_ENTSCH not actively
ALARM_OPT_HIGH BEAM not actively PANIC MODE not actively floodlight cleaning actively SENSOR RAIN actively
STANDRUECKSCHALTUNG not actively STROKE_DELAY_Technical College_AHEAD 500ms WITHOUT disk reduction not
actively function door lock not actively REMOTE CONTROL_1 not actively REMOTE CONTROL_2 not actively REMOTE
CONTROL_3 not actively REMOTE CONTROL_4 not actively Technical College disengage criterion Us FUNCTION
CONVERTIBLE not actively comfort opening_FB actively Technical College_LAYERING_COVERING_OEFF not actively
issue window actively WINDOW CRANK BEHIND actively EINKLEMMSCH_AHEAD actively EINKLEMMSCH_BEHIND not actively
EINKLEMMSCH_REVERSIEREN long Technical College_driver door_TIP_TO actively MAUT_NUR_BEI_KL15EIN not actively
Technical College_passenger door_TIP_TO actively FH_TUEREN_HINTEN_TIPP_ZU not actively FUNCTIONS_TOURING not
actively HECKSCHEIBE_ENTR_SENDER_1 not actively HECKSCHEIBE_ENTR_SENDER_2 not actively
HECKSCHEIBE_ENTR_SENDER_3 not actively HECKSCHEIBE_ENTR_SENDER_4 not actively REAR WINDOW_ENTRI_INTERIOR not
actively KOMFORTSCHLIE_FB_O_FH_HI actively
ENTSICHERN_center curl not actively QUIT_AKUST_SHARPNESS_LID not actively QUIT_AKUST_ENTSCH not actively
ALARM_OPT_HIGH BEAM not actively PANIC MODE not actively floodlight cleaning actively SENSOR RAIN actively
STANDRUECKSCHALTUNG not actively STROKE_DELAY_Technical College_AHEAD 500ms WITHOUT disk reduction not
actively function door lock not actively REMOTE CONTROL_1 not actively REMOTE CONTROL_2 not actively REMOTE
CONTROL_3 not actively REMOTE CONTROL_4 not actively Technical College disengage criterion Us FUNCTION
CONVERTIBLE not actively comfort opening_FB actively Technical College_LAYERING_COVERING_OEFF not actively
issue window actively WINDOW CRANK BEHIND actively EINKLEMMSCH_AHEAD actively EINKLEMMSCH_BEHIND not actively
EINKLEMMSCH_REVERSIEREN long Technical College_driver door_TIP_TO actively MAUT_NUR_BEI_KL15EIN not actively
Technical College_passenger door_TIP_TO actively FH_TUEREN_HINTEN_TIPP_ZU not actively FUNCTIONS_TOURING not
actively HECKSCHEIBE_ENTR_SENDER_1 not actively HECKSCHEIBE_ENTR_SENDER_2 not actively
HECKSCHEIBE_ENTR_SENDER_3 not actively HECKSCHEIBE_ENTR_SENDER_4 not actively REAR WINDOW_ENTRI_INTERIOR not
actively KOMFORTSCHLIE_FB_O_FH_HI actively

[Dexter]

Quote:

Originally Posted by Razza77

Once the coding has finished i normally turn the ignition off and then leave it for 20 seconds and then check to see if the changes have been taken.

i take it you are doing that and no changes are there and then when reading again the changes you have made are not changed.

If the above is the case then it would appear that it is not writing to the module even though it looks to be.

I would double check the godfather profile that you set up again just to make sure that is all correct.

thats correct,I'll check my profile

[Dexter]

Quote:

Originally Posted by fjrman

Hi Dexter,

go here for a better translator ncsdummy.rar

it will translate as you use ncs expert


Steve

thanks Steve,what's the password for it?


actually,looking at i Steve,it seem's to make things more complicated? what does the tool do?

[Dexter]

sorted my problem,there was an error in the profile....


I added the indicator code but it threw up an error message.

so what options have you turned on?