The M3cutters - UK BMW M3 Group Forum
 

Go Back   The M3cutters - UK BMW M3 Group Forum > M3cutters Garage > Member Rides



Reply
 
Thread Tools Display Modes
Old 26th April 2018, 02:36 PM   #21
mr_vys
Wearing official underwear
 
mr_vys's Avatar
 
Join Date: Oct 2010
Location: Brentwood, Essex
Posts: 158
Car: bicycle
Colour Combo: Carbon black / Black nappa
Default

Awesome work there mate!
mr_vys is offline   Reply With Quote
Sponsored links
Old 26th April 2018, 05:35 PM   #22
grchmason
Achieved official socks
 
grchmason's Avatar
 
Join Date: Jan 2010
Location: Burnham, Bucks
Posts: 834
Car: Phoenix Yellow E46 M3 Coupe
Colour Combo: Phoenix Yellow / Kiwi
Default

Great progress!

Arches look loads better and gives that bit of piece of mind knowing thats done!


.
grchmason is offline   Reply With Quote
Old 30th April 2018, 01:05 PM   #23
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Quote:
Originally Posted by mr_vys View Post
Awesome work there mate!
Quote:
Originally Posted by grchmason View Post
Great progress!

Arches look loads better and gives that bit of piece of mind knowing thats done!


.
Thanks guys.

Forgot to state also Paul enabled M-Track Mode when he was tinkering about with the coding the other night.

Hopefully get a chance to try it out soon...
Deeg01 is offline   Reply With Quote
Old 16th May 2018, 08:59 PM   #24
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Latest update today.

MOT passed for another year. Needed a wee bit of work before hand, new power steering hoses and cv boot repair to the drive shaft. Then at the last minute we noticed a snapped eibach spring at the rear. Thankfully through a friend of a friend i managed to source a set of oem rear springs to get me through the MOT.

End result was passing with no advisories.
Ready to rock for another year!!
Deeg01 is offline   Reply With Quote
Old 22nd August 2018, 08:30 AM   #25
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

So it's been a little while since I last updated due to various reasons...

And things have taken a dramatic turn!!!

For those that follow me on insta - @M3D1EEG, Shameless plug, you will be aware of the situation...

So I ordered up the parts to do the bottom end bearings, including replacing the conrod bolts on an early model engine due to the higher mileage, 129K.


This was scheduled for Mid July, where I would be visiting Paule Claude or Ptek for the work to be compeleted in Glasgow. Early start for me to drive down there from Aberdeen so we could get the work completed in one day...

Arrived on time and Paul got straight to it, we briefly discussed a hesitation I had between 2-3k Revs under acceleration, I was thinking this could have been coil packs as the head gasket was worked on last year before I bought the vehicle.
Paul did a vanos test and it all came back spot on so that ruled that out also.

However during the strip down pull noticed deposits on plug #6, he advised to do a compression test just to rule everything out.



Cyl 6 - 180
Cyl 5 - 170
Cyl 4 - 170
Cyl 3 - 178
Cyl 2 - 150
Cyl 1 - 148

To say I was devastated was an understatement!
We decided to push on with the bottom end bearings anyway as this still needed fixed.

While Paul worked on that I worked in the background trying to figure out how I was going to get the headgasket sorted, again, before a charity event I had in a few weeks.
The HG work was previously done by Autobhan in HAlesown before I bought the car, and I thought I would chance my luck by speaking to them, even though I was not a customer of theirs. All credit to Rob at Autobhan as soon as we spoke he was instantly offering to fix the issue and was offering to do it at his cost!
Amazing offer from them considering I had never actually paid them a penny for the work in the first place!

Hoever things took another turn as Paul continued on with the strip down of the bottom end.

The conrod bolt heads were found to be partially rounded:



Luckily I bought the replacment bolts instead of following BMW's tech advice and reuse the existing bolts. Thanks to Paul for that advice!

However as he removed the first shell the extent of the wear was obvious:
#1 - Bottom


#1 - Top


But the worst was yet to come...

Paul also found some shards of metal in the oil pan...



And Also the damage to the crank...




This was the point where my day could not get any worse...

The damage to the top side of the crank was worse, but due to the angle we could not get a decent picture.
The decision was made to button everything up as it was, and I would be reconsidering my options.

Paul made the car road worthy again, and I nursed it back up the road to Aberdeen, where it has sat for the last 5 weeks since that day.

I have since phoned around every BMW speciliast to get advice and quotes for complete rebuilds...

In the background I have a friend who works at a BMW Parts dept and did some homework for me, on his own accord.
He had sourced me a new engine from the factory in Germany, and had managed to get a fantastic price for me as a one off offer from BMW.

I was in a position that I could not refuse this offer and I have since bought this engine fro the factory in Germnay...

it has now also arrived in the UK and we are just waiting to fit it, hopefully in the next couple of weeks...

how stunning is this....









A complete block with Vanos, top and bottom end complete, Waterpump, thermostat and oil filter housing etc.

I honestly cannot thank Douglas Parks BMW of Hamilton enough for this fantastic opportunity of this engine! I have been called mad by work colleagues, and even family have said I should have just put a match and a gallon of petrol to the car as it would have been cheaper. However I have made the decision this is a restoration and I am committed to this project now.

The car is currently sat out side the house waiting on Paul fitting the engine now.
At the same time we will be replacing the clutch, coil packs, all belts tensioners, engine mounts, gearbox mounts as well so it is all good to go.

I have also recently bought an Eventuri second hand after it appeared on my Facebook feed and an impulse moment meant it arrived a few days later..



While I have been gathering up these pieces, I have also replaced all the springs with Intrax after I broke a rear Eibach one earlier in the year:





So hopefully the next update I have is that we have the new engine in and running. Then it will be a full running in procedure followed by 5K mile oil changes from now on.

Last edited by Deeg01; 22nd August 2018 at 03:44 PM.
Deeg01 is offline   Reply With Quote
Old 27th August 2018, 08:47 AM   #26
Crapmk3
On the path
 
Crapmk3's Avatar
 
Join Date: Mar 2012
Location: London Harrow
Posts: 65
Car: 03 BMW M3 Individual
Colour Combo: Black leather blue stitching
Default

Never knew you could buy a brand new S54 from the factory. It looks great .
Crapmk3 is offline   Reply With Quote
Old 27th August 2018, 11:11 AM   #27
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Quote:
Originally Posted by Crapmk3 View Post
Never knew you could buy a brand new S54 from the factory. It looks great .
There were 2 engines sitting there at the time this was ordered, it is actually a remanufactured engine by BMW. But I'm not going to complain with that as it still comes with a 2 year warranty and all the associated parts, Vanos water pump etc.
Deeg01 is offline   Reply With Quote
Old 14th September 2018, 10:02 AM   #28
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default The New Engine!!!

So last weekend I travelled down to Glasgow on Sunday night to prepare for an early start the next morning with Paul from PTek.

The task in hand - Full engine swap for a brand new S54 supplied from Germany....


At the same time, I decided it was best to replace a number of other parts, Coil packs, braided VANOS line, engine mounts, belts, tensioners, gearbox mounts, clutch, DMF and gearbox oil. I also took the opportunity to fit the 540i SSK kit as well.



We started off by stripping out all the trim and associated parts to get to the main block it's self.









Once we had access to the main block it's self we decided to remove the gearbox and engine in one piece.





While Paul went about removing the gearbox and replacing the clutch and DMF I went about cleaning up parts and the engine bay.

Throttle bodies before and after:




Some of the plastics being cleaned up.

and heat shields being polished up


Then it was on to preping the new engine with all the parts we were refitting:











Then we were ready to drop the new block and gearbox back in to the car:












After everything was all bolted up, and we had a live connection again Paul set up about a quick refresh of the ECU resetting ignition adaptions etc,


Then we were ready for the first start, glad to say she started up first time! Running sweet! timing was spot on straight from the factory.

Then it was a quick tidy up, and a pit stop for a top up of VPower before a drive back up to Aberdeen on Tuesday night, home for 2:30AM Wednesday morning!


I cannot thank Paul From PTek enough for the effort he put in and for letting me assist, and clean up things as he removed them. Not sure if I was a help or a hindrance but I appreciated him allowing me to be part of the process, not sure how many people can say they have fitted a brand new S54 straight from the factory to their own car???
Also a huge thank you to Douglas Park BMW in Hamilton for the great service throughout this whole task, from supplying the engine it's self to last minute requests when we realised we missed some nuts or bolts etc. Honestly these guys were superb!

Now I have the joy of breaking in the new engine, full 1200 mile running in has started again and I will be getting a fresh running in service completed. currently at 300 miles of the 1200 miles already after my drive from Glasgow to Aberdeen and a couple daily commutes to work.
Deeg01 is offline   Reply With Quote
Old 14th September 2018, 10:21 AM   #29
ns38
Achieved official socks
 
ns38's Avatar
 
Join Date: Nov 2012
Location: West London
Posts: 897
Car: e90 m3 dct
Colour Combo: Ruby black individual
Default

That's awesome, rare to see an e46 getting attention like this nowadays.

Hope you can rack up the miles and enjoy the beast.
ns38 is offline   Reply With Quote
Old 14th September 2018, 11:36 AM   #30
Jimbo25
Achieved official socks
 
Jimbo25's Avatar
 
Join Date: Jan 2015
Location: Munich
Posts: 1,107
Car: E46
Colour Combo: Laguna Seca Blue / Black
Default

That's amazing - would never have thought you'd still get a new buttoned up S54 - the crate it's sat in has come straight from the factory, they use that pink colour for all lineside boxes/parts storage.

Amazing work, if you ever write the car off can I have first dibs on the engine please It'd be really interesting to note a couple of things, first how quiet is the vanos/top end? Does it kangaroo at all, i.e. are the things we put up with day to day on our cars still there on yours? I guess a lot of it is not actually to do with the engine hardware itself, but the VANOS and valvetrain noise really intrigues me.
Jimbo25 is offline   Reply With Quote
Old 14th September 2018, 12:11 PM   #31
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Quote:
Originally Posted by ns38 View Post
That's awesome, rare to see an e46 getting attention like this nowadays.

Hope you can rack up the miles and enjoy the beast.
Thanks, yeah trying my hardest to break her in ASAP so I can open her up again.

Quote:
Originally Posted by Jimbo25 View Post
That's amazing - would never have thought you'd still get a new buttoned up S54 - the crate it's sat in has come straight from the factory, they use that pink colour for all lineside boxes/parts storage.

Amazing work, if you ever write the car off can I have first dibs on the engine please It'd be really interesting to note a couple of things, first how quiet is the vanos/top end? Does it kangaroo at all, i.e. are the things we put up with day to day on our cars still there on yours? I guess a lot of it is not actually to do with the engine hardware itself, but the VANOS and valvetrain noise really intrigues me.
You'll have to join the queue for the engine I'm afraid, already been asked 3 or 4 times!!
I have a video of the first start up and her running once warmed up, I'll find away to put it up on here.
Will also be doing a power run for a good base line once the running in service is comeplete
Deeg01 is offline   Reply With Quote
Old 14th September 2018, 01:35 PM   #32
B Tank
Wearing official underwear
 
B Tank's Avatar
 
Join Date: Aug 2017
Location: Earl Shilton, Leicestershire
Posts: 194
Car: 2003 M3 SMG Coupe
Colour Combo: Silver Grey / Imola
Default

That engine looks stunning!
B Tank is offline   Reply With Quote
Old 22nd September 2018, 08:38 PM   #33
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Quote:
Originally Posted by B Tank View Post
That engine looks stunning!
Thank you. Certainly runs sweet so far!
Deeg01 is offline   Reply With Quote
Old 22nd September 2018, 08:49 PM   #34
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Ok so this week a couple more jobs tackled.

First up I was booked in at MB garage services for full alignment given that Iíd fitted new springs and we dropped the subframe for the engine swap.



Unfortunately I didnít get a before print out, they did say the rear was up at 3degrees for the camber.



She drives like a dream now. Wasnít bad before but can certainly feel the difference after the alignment.

This weekend I decided to finish off freshening up the engine bay

New pollen filter cover:




Now it shows I need to get a new scuttle panel!!

Also took the time to recline up the bumper and try and sort out the sag and when we fitted the engine I forgot to connect up the screenwash level sensor




Decided to also give the engine bay and underside of the bonnet a clean up:







Dressed the engine bay with aerospace 303 and give the paint work a cleanse with auto finesse Tripple.

Off out to a cars n coffee tomorrow so hopefully get some pics there of the whole car... if I remember!
Deeg01 is offline   Reply With Quote
Old 22nd September 2018, 09:01 PM   #35
grchmason
Achieved official socks
 
grchmason's Avatar
 
Join Date: Jan 2010
Location: Burnham, Bucks
Posts: 834
Car: Phoenix Yellow E46 M3 Coupe
Colour Combo: Phoenix Yellow / Kiwi
Default

Tripple is heavy in fillers great but on Titan Silver I always think seal in with a true synthetic like Zaino or Werkstatt and really gives a glass like finish!

But either way car looks fantastic and great job on the engine bay 303 takes some beating!

Looking forward to the next update my friend!


.
grchmason is offline   Reply With Quote
Old 22nd September 2018, 09:20 PM   #36
Deeg01
On the path
 
Deeg01's Avatar
 
Join Date: Dec 2016
Location: Aberdeen
Posts: 99
Car: 2003 E46 M3
Colour Combo: Titan silver / Black
Default

Quote:
Originally Posted by grchmason View Post
Tripple is heavy in fillers great but on Titan Silver I always think seal in with a true synthetic like Zaino or Werkstatt and really gives a glass like finish!

But either way car looks fantastic and great job on the engine bay 303 takes some beating!

Looking forward to the next update my friend!


.
Thanks. I only used the tripple on the paint work in the engine bay. Exterior will be getting full machine polished over the winter hopefully.

Agree about it being full of fillers though. Great for a quick fix!
Deeg01 is offline   Reply With Quote
Old 22nd September 2018, 10:10 PM   #37
grchmason
Achieved official socks
 
grchmason's Avatar
 
Join Date: Jan 2010
Location: Burnham, Bucks
Posts: 834
Car: Phoenix Yellow E46 M3 Coupe
Colour Combo: Phoenix Yellow / Kiwi
Default

Quote:
Originally Posted by Deeg01 View Post
Thanks. I only used the tripple on the paint work in the engine bay. Exterior will be getting full machine polished over the winter hopefully.

Agree about it being full of fillers though. Great for a quick fix!


I love tripple and really as used correctly it's a great product!

Your M3 really is a credit to you and it shows please keep the updates coming

All the best


.
grchmason is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes



All times are GMT. The time now is 01:42 AM.


This website uses cookies. By continuing to use the site you are agreeing to our use of cookies. To find out more about the cookies this website uses, click here.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © 2007 - 2018 M3cutters. All Rights Reserved.