The M3cutters - UK BMW M3 Group Forum
 

Go Back   The M3cutters - UK BMW M3 Group Forum > M3cutters Garage > BMW Diagnostic, programming and software discussion



Reply
 
Thread Tools Display Modes
Old 12th August 2017, 10:40 AM   #1
PDQ
Wearing official underwear
 
PDQ's Avatar
 
Join Date: Aug 2012
Location: Kent
Posts: 177
Car: E60 M5
Colour Combo: Silver/Grey
Default E60 M5 - Wont read FA Values

I moved from an M3 to an M5 and want to tweak some coding to add an aux port but hit an error.

I cannot get NCSExpert to read the FA list - it reads the VIN, but then during the FA read display Unvalid Mark $525

$525 from my guess is a 'coolbox' option - the car obviously thinks its got one, but I can assure you it hasn't

really frustrated as I have installed v60 of the e60 sp-daten latest NCSExpert - and have a 9 hours of driving tomorrow
PDQ is offline   Reply With Quote
Sponsored links
Old 19th August 2017, 03:47 PM   #2
PDQ
Wearing official underwear
 
PDQ's Avatar
 
Join Date: Aug 2012
Location: Kent
Posts: 177
Car: E60 M5
Colour Combo: Silver/Grey
Default

Well, well well....

I was able to remove the annoying $525 (Cool Box that isn't fitted from my VO. Now I have CAS and LMA both with the same list of Options

Problem now is I started to program CAPPL with the AUX setup (non_Mounted to Mounted) it seemed to program well - I could see the AUX option now on the Idrive - but then when I turned the ignition fully off and on again - idrive now is just in some form of boot cycle

I removed $140 and $525 from the VO - as they were the 2 that were causing me the main challenges. Not 100% sure what $140 actually is as an option (RKLE? - Police Tones?)

So now I can open NCSExpert - read the CAS fine, but I cannot seem to reset the CAPPL module - it fails to write to it when I try the SG_Codeiteren option with a blank MAN file and also the profile edited.

so now I have a constantly rebooting CCC - 2 hour drive to Peterborough tomorrow will be boring

Last edited by PDQ; 19th August 2017 at 03:52 PM.
PDQ is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes



All times are GMT. The time now is 07:22 AM.


This website uses cookies. By continuing to use the site you are agreeing to our use of cookies. To find out more about the cookies this website uses, click here.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 2007 - 2014 M3cutters. All Rights Reserved.