The M3cutters - UK BMW M3 Group Forum

Go Back   The M3cutters - UK BMW M3 Group Forum > Forum Sponsors and Advertisers > CA Technologies International Ltd

Thread Tools Display Modes
Old 18th August 2017, 04:00 PM   #1
David @ CA
Site Sponsor
David @ CA's Avatar
Join Date: Sep 2013
Posts: 791
Car: Vectra C estate 2.0T 16v petrol
Default Rogue Shortshifter E46 M3

SOLD Thanks


BMW E46 M3 Coupe / Convertible
BRAND NEW Short Shift Kit

Offer Price 360.00 plus 15.00 delivery
(normal retail approx. 415.00)

We are also including

1 pair of Rogue Engineering
Uprated Transmission Mounts (street compound)

Normal Retail 67.00

Features that set the Rogue Shifter apart from others include:

CNC Construction
CNC machined 303 stainless steel upper, adding approximately 100 grams more to the top of the shifter lever, thus improving shifter feel.
Shifter lever lower portion is also CNC machined from 303 stainless steel.

Pivot Ball and Pivot Bushing
These are made from Ertalyte TX thermoplastic material. This superior material maintains the vibration dampening qualities and built-in lubricity of the factory pivot, but also adds superior heat and wear resistance. Its coefficient of friction is 420% better than a stainless steel pivot ball. Despite its hardwearing properties, we have made this pivot ball replaceable for possible future maintenance.
Rogue Shortshifter Levers also use superior bonding materials for the composite pivot ball and bushes (bonded in a similar manner to original BMW fitment) to achieve a shorter, more positive shift throw without sacrificing the vibration dampening that was built in by BMW.

Weighted Selector Rod (WSR)
Simply shortening the shift lever or moving the pivot point will not produce the optimal shift feel. The smooth action that sets Rogue kits apart comes from the unique weighted selector rod. This replaces the factory selector rod with a higher quality version that has significantly greater mass. This counteracts the additional leverage effort normally required with shorter levers so as to pretty much match the factory "lightness of shift", thus doing away with the requirement for a heavier shift knob as often used by inferior shift kits in an attempt to lessen the shift effort.

Included with the Rogue Shortshifter are:
Short shift lever.
Weighted selector rod (not all models).
Shifter carrier with pivot relocation adapter (not all models).
Delrin carrier bushings (not all models).
Shifter removal tool.
Factory replacement washers, clips and grease.
Factory replacement carrier pin (not all models).
Fully detailed installation instructions.

Last edited by David @ CA; 21st August 2017 at 03:37 PM.
David @ CA is offline   Reply With Quote


Thread Tools
Display Modes

All times are GMT. The time now is 03:08 AM.

This website uses cookies. By continuing to use the site you are agreeing to our use of cookies. To find out more about the cookies this website uses, click here.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © 2007 - 2014 M3cutters. All Rights Reserved.