The M3cutters - UK BMW M3 Group Forum
 

Go Back   The M3cutters - UK BMW M3 Group Forum > M3 and M4 Talk > E46 M3 (2001-2006)



Reply
 
Thread Tools Display Modes
Old 24th June 2018, 10:11 AM   #1
trebor
A mere Chipper
 
trebor's Avatar
 
Join Date: Nov 2017
Location: canterbury
Posts: 23
Car: 2004 e46 M3
Colour Combo: black
Default Drivers seat, back cover.

Hi all

Had to swap out the bolster motor on my driver seat. All fixed and back in. However I've not got the seat back on correctly as the back cover is not sitting flush with the leather cover. There are circles on each side of the leather and white plastic clips glued on the inside of the seat back cover. Not sure how the the two work together to get tight fit.

trebor is online now   Reply With Quote
Sponsored links
Old 24th June 2018, 03:20 PM   #2
pee wee
Achieved official socks
 
pee wee's Avatar
 
Join Date: Aug 2012
Location: Ramsgate
Posts: 822
Car: 2003 bmw m3 COUPE
Colour Combo: Estrol BLUE COUPE
Default

you have to start by pushing it up from the bottom so the clips slide in then put the 2 pins under the back hope this helps you
pee wee is offline   Reply With Quote
Old 24th June 2018, 05:30 PM   #3
Caveman
Achieved official socks
 
Caveman's Avatar
 
Join Date: Dec 2013
Location: Gerrards Cross, Bucks
Posts: 1,229
Car: 2002 M3 Convertible, 1995 993 C4 & 2010 530D
Colour Combo: Carbon Black/ Black / Black
Default

What pee wee said. Locate at the top, press fit the two sides and then use the two screws at the base. The side fittings should clip in with a satisfying thump on the back of the seat cover.
Caveman is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes



All times are GMT. The time now is 07:44 PM.


This website uses cookies. By continuing to use the site you are agreeing to our use of cookies. To find out more about the cookies this website uses, click here.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright © 2007 - 2018 M3cutters. All Rights Reserved.