View Single Post
Old 16th February 2018, 11:04 PM   #205
M3CARBON1
Site Sponsor
 
M3CARBON1's Avatar
 
Join Date: Oct 2011
Location: Global Solution Offered Remotely for all remapping needs
Posts: 1,637
Car: 2002 E46 M3
Colour Combo: Carbon - Red nappa
Default

Simple and easy diagram to use here and its correct.

Quote:
Originally Posted by 7DT View Post
Word of warning if you have a GM map sensor with and pin out then the picture with wiring instructions for pin 1 2 3 is incorrect and doesn't match up.

Use this instead:
Pin A -> x003 pin 16 = PIN2 on CSL MAP = ground
Pin B -> x003 pin 18 . = PIN3 on CSL MAP = signal
Pin C -> x003 pin 7 = PIN1 on CSL MAP = power

use this diagram (easy to google, but just as easy to put in here)


So when using the below diagram, be aware that I think this is if you have an actual CSL map sensor, and therefore, ignore pinout on that and use the above.
http://photobucket.com/gallery/user/...LmpwZw==/?ref=
M3CARBON1 is offline   Reply With Quote